Advertisement
IV. INTERMEDIARY PROCESSING TRAY ASSEMBLY
A.
Intermediary Processing Tray Operation
1.
Outline
The intermediary processing tray is designed to organize sheets coming from the copier into a
stack for offset and stapling operations.
The intermediary processing tray assembly consists of a returning roller and stack delivery
belts, the latter of which are equipped with stack delivery levers and operate as a pair.
When paper reaches the intermediary processing tray, the intermediary processing tray paper
sensor (S5) turns on.
When the copier is turned on, the stack processing motor (M2) is driven so as to move the
returning roller and the stack processing belt to the home position.
Stack processing
motor
M2
Motor direction
Clockwise
Counterclockwise
COPYRIGHT © 1999 CANON INC.
Returning roller home position sensor (S3)
One-way clutch
Stack delivery belt
Figure 2-401
Drive
Stack delivery belt
Returning roller
Returning roller
Table 2-401
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Returning roller
Arrow in Figure 2-401
Stack tray side
Drive torque
Strong
Weak
2-11
Advertisement
Chapters
