Removing The Original Tray; Removing The Upper Cover - Canon DADF-J1 Service Manual

1.1.5 Removing the Original Tray

1) Move the side guides (front) [1]/(rear)
[2] to the inside; then, remove the two
screws [3], and detach it.
After mounting it, be sure to ad-
just the horizontal registration.

1.1.6 Removing the Upper Cover

1) Remove the body front cover, and re-
move the screw [1]; then, remove the
positioning pin [2] from the pickup
front side plate.
2) Remove the upper cover [3] by remov-
ing the stepped screw [5] used to keep
the link arm [4] in place, i.e., the one
connecting the pickup side plate (front,
rear) and the upper cover.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
[1]
[3]
F03-101-07
[5] [4]
[3]
[5]
F03-101-08
[3]
[2]
[4] [2] [1]
3-5