Cisco PenTeleData IP DECT 6825 Series User Manual page 34

Set the Timer to Turn Off the Screen
You can set the handset to turn off the screen after a specific amount of time. Before the screen turns off, it
dims after a specific amount of inactivity.
Procedure
Step 1 Press Menu
Step 2 Select Settings
Step 3 Highlight your choice.
• 5 seconds: The screen dims after 2 seconds and turns off after 5 seconds.
• 10 seconds: The screen dims after 5 seconds and turns off after 10 seconds.
• 20 seconds: The screen dims after 5 seconds and turns off after 20 seconds.
• 30 seconds: The screen dims after 10 seconds and turns off after 30 seconds.
• 45 seconds: The screen dims after 10 seconds and turns off after 45 seconds.
• 60 seconds: The screen dims after 10 seconds and turns off after 60 seconds.
Step 4 Press Select to save the setting.
Security Menu
Set the Handset Lock and PIN
You can set up the handset to require a PIN to unlock it.
Note When the keypad is locked, you can only dial emergency numbers.
The default PIN is 0000.
Procedure
Step 1 Press Menu
Step 2 Select Settings
Step 3 Enter the PIN and press OK.
Step 4 Highlight Phone lock.
Step 5 Press Off to turn off the need for a PIN or On to require a PIN.
Step 6 Select Change PIN.
Step 7 Enter a new PIN and press OK.
You must use four digits for the PIN.
Step 8 Press Select to save the setting.
34 | P a g e
.
> Power save.
.
> Security > Phone lock.
Cisco IP DECT 6825 Series User Guide