Cisco PenTeleData IP DECT 6825 Series User Manual page 18

Enable/Disable Call Waiting – All Calls
Enable or Disable Call Waiting on all future calls.
Procedure
Step 1 Dial *43 to enable Call Waiting for all calls.
Step 2 Dial *44 to disable Call Waiting for all calls.
Decline a Call
You can send an active or ringing call to your voicemail system or to a preset phone number.
Procedure
Decline a call by performing one of the following actions:
• Press Decline.
• If you have multiple incoming calls, highlight the incoming call and press Decline.
Do Not Disturb
You can turn on or off the do not disturb feature by dialing the respective star codes that are configured.
Application Menu Procedure
Step 1 Press Menu
Step 2 Select Settings
Step 3 Highlight your choice.
• Disabled (default): DND mode is off.
• Enabled: DND mode is on.
Step 4 Press Select to save the setting.
* Code Procedure
Step 1 To turn on DND, dial *78.
Step 2 To turn off DND, dial *79.
Call Screening
You have control to ensure you receive important calls. You can limit the callers that ring your phone, filter callers,
or forward important callers to another number. Calls from anonymous callers, or other callers, can be given
special treatment: either being blocked, sent directly to voicemail, forwarded to another phone number (like your
mobile), or having a custom ring pattern assigned.
Anonymous Call Block
Calls from anonymous callers or phones not sending a caller ID, can waste your time and distract you from other
calls you want to take. These calls can be filtered from even ringing your phone. You can choose to have
anonymous callers either hear a busy signal or a message informing them that you are not accepting calls from
anonymous callers.
18 | P a g e
.
> Do Not Disturb.
Cisco IP DECT 6825 Series User Guide