Chapter 2 - Handset Setup - Cisco PenTeleData IP DECT 6825 Series User Manual

Handset Setup
Install the Battery in the Handset
The handset battery is shipped inside the handset, but there is a plastic tab over the battery contacts. You need
to remove the plastic tab.
Procedure
Step 1 On the back of the handset, turn the latch counterclockwise to unlock the back, lift the clip, and lift the
cover to remove the battery cover.
Step 2 Remove the battery from the handset.
Step 3 Remove the plastic over the contacts.
Step 4 Place the battery under the clip and drop it into the compartment.
10 | P a g e
Cisco IP DECT 6825 Series User Guide
CHAPTER
2