Cisco PenTeleData IP DECT 6825 Series User Manual page 31

Step 1 Press Menu
Step 2 Select Settings
Step 3 Select the ringtone you want to change.
• Ring melody
• Ring normal msg.
• Ring urgent msg.
• Ring emerg. high
• Ring emerg. med
• Ring emerg. low
• Alert tone
Step 4 Press up or down on the ring of the navigation cluster
Step 5 Press Play to hear the tone.
Step 6 Press Select to save the tone.
Set the Handset Vibration Mode
You can set the handset to vibrate when you have an incoming call.
Procedure
Step 1 Press Menu
Step 2 Select Settings
Step 3 Highlight your choice.
• Off (default): When an incoming call rings on the handset, the handset doesn't vibrate.
• Vibrate then ring: When an incoming call rings on the handset, the handset vibrates and then rings.
• Vibrate only: When an incoming call rings on the handset, the handset vibrates. You do not hear the
ringtone.
• Vibrate and ring: When an incoming call rings on the handset, the handset vibrates and rings at the
same time.
Step 4 Press Select to save the setting.
Set the Tone When a Key is Pressed
You can set the sound you hear when you press a key.
Procedure
Step 1 Press Menu
Step 2 Select Settings
Step 3 Highlight your choice.
• Silent (default): When you press a key, you don't hear anything.
• Click: When you press a key, you hear a click.
• Tone: When you press a key, you hear a tone.
Step 4 Press Select to save the setting.
31 | P a g e
.
> Audio settings.
.
> Vibrate.
.
> Key sound.
Cisco IP DECT 6825 Series User Guide
to highlight a tone.