Cisco PenTeleData IP DECT 6825 Series User Manual page 17

Answer a Call
If you have multiple lines, your handset displays the line that has the incoming call.
If you have a Bluetooth headset paired to the handset, the call is answered on the headset. If you don't have
a Bluteooth headset paired, the call is answered on the handset.
Procedure
Press Answer/Send
Answer Call Waiting
If you are on a call, and another call comes in, you hear the call waiting tone and the incoming call displays
on the handset screen.
Procedure
Do one of these actions:
• To accept the call, press Answer/Send
• To reject the call, press Decline. The call is sent to voicemail, if configured.
Call Waiting
When you're on an active call, you know that a call is waiting when you hear a single beep and the session button
flashes red.
Procedure
Step 1 (Optional) If you have more than one call waiting, select an incoming call.
Step 2 Press the line button.
Temporarily Disable Call Waiting – One Call
Keep the next phone call you make from being interrupted.
Procedure
Step 1 Lift the receiver.
Step 2 Dial *70.
Step 3 Wait for a second dial tone.
Step 4 Dial the number of the party you want to reach.
• Call Waiting is disabled for the current call.
Step 5 After you hang up, Call Waiting will be active again.
17 | P a g e
.
. Your active call is automatically put on hold.
Cisco IP DECT 6825 Series User Guide