Optional Accessories; After Use - Makita LS1018 Instruction Manual

Slide compound miter saw
Hide thumbs Also See for LS1018:
Table of Contents

Advertisement

not point to 45°, turn the 45° bevel angle
adjusting bolt on the right side of the arm
holder until the pointer points to 45°.
To adjust the right 45° bevel angle, perform
the same procedure as that described
above.
Remove and check the carbon brushes regularly.
Replace when they wear down to 3 mm in length. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
► 1. Screwdriver 2. Brush holder cap
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.

After use

After use, wipe off chips and dust adhering to the
tool with a cloth or the like. Keep the blade guard
clean according to the directions in the previously
covered section titled "Blade guard". Lubricate the
sliding portions with machine oil to prevent rust.
When storing the tool, pull the carriage toward you
fully.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
WARNING:
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
1
2
NOTE:
22 ENGLISH
These Makita accessories or attachments
are recommended for use with your Makita
tool specified in this manual. The use of any
other accessories or attachments may result in
serious personal injury.
Only use the Makita accessory or attachment
for its stated purpose. Misuse of an accessory
or attachment may result in serious personal
injury.
Steel & Carbide-tipped saw blades
(Refer to our website or contact your local Makita
dealer for the correct saw blades to be used for
the material to be cut.)
Sub-fence R
Vise assembly (Horizontal vise)
Vertical vise
Socket wrench with hex wrench on its other end
Holder
Holder assembly
Dust bag
Elbow
Triangular rule
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ls1018lLs1018l gba

Table of Contents