Troubleshooting; Specifications; Disposal; Reference Information - Honda CV7285Z Owner's Manual

TROUBLESHOOTING

Check the following points when there is a malfunction.
If a problem is not resolved or the symptoms do not improve,
consult an authorized Honda servicing dealer.
Charging does not start
Cause
The AC plug is not connected
to an electric outlet.
The charging connector is
not connected to the battery
connector.
Charging stops midway
Cause
The Battery Pack is not
being cooled correctly, so
charging is stopped by the
high-temperature protection
function.
ERROR indicator is lit
Cause
Protection function is
engaged.

SPECIFICATIONS

Model
Type
Description code
Length
Width
Height
Mass
Input voltage
Input frequency
Output voltage
Output current
Batteries that can be charged
Charging temperature range

DISPOSAL

To protect the environment, do not dispose of this product
using standard waste collection. Observe the local laws and
regulations or consult your authorized Honda dealer for
disposal.
Do not dispose of electric equipment together
with household waste material. If electrical
appliances are disposed of in landfills or dumps,
substances can leak and react and enter into
the foodchain, damaging your health and well-
being. For further information on the disposal of
this product, please contact your dealer or your
nearest domestic waste collection service.
4
Solution
Connect the AC plug to an
electric outlet correctly.
Connect the charging
connector to the battery
connector correctly.
Solution
Position the Battery Pack so
there are no gaps between
the intake port of the Battery
Charger and the exhaust port
of the Battery Pack.
Solution
Consult an authorized Honda
dealer.
CV7285Z
AM EM SWM BM JM
UAAC
272 mm (10.7 in)
352 mm (13.9 in)
270 mm (10.6 in)
11.2 kg (24.7 lbs)
AC 100 V to 240 V
50/60 Hz
DC 82.8 V
8.5 A
DP72104Z
5 to 30 °C (41 to 86 °F)

REFERENCE INFORMATION

For USA:
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations
4900 Marconi Dr.
Alpharetta, GA 30005-8847
(770) 497-6400
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help.