Table of Contents
Advertisement
9.6
Muting the buzzer
When in measurement mode it is possible to mute the buzzer.
Press on "-",
-
Press on "-" again to reset the buzzer.
-
IMPORTANT NOTE: in order to prevent any misuse of the equipment, there is an automatic reactivation of
the buzzer each time the medium changes (air to liquid, liquid to water, etc.) or after 5 minutes muting. To
keep the buzzer muting, press again on "-".
9.7
Backlight
Refer to Figure 9-6.
When in measurement mode press "enter": this switches on the backlight. After around 10 seconds, the light
switches off automatically to save the battery life.
50461/GTEX MMC/1111
ON
Buzzer OFF
- / medium / 5 min
auto
Backlight ON
Figure 9-6
UTImeter
Ver x.xx
Battery
ééééé 97%
Init.
*********
-
E
25.94°C
30
UTImeter Gtex MMC
Advertisement
Table of Contents
