Table of Contents
Advertisement
9.4
Selecting the temperature resolution
The temperature reading can be given with 1 or 2 digits after the dot. Select the appropriate resolution as
shown on Figure 9-4.
ON
Switch on the equipment,
-
Wait until the temperature is displayed,
-
Press on "+" to enter the settings menu,
-
Press on "enter", "LED menu" is displayed,
-
Press on "+"; "T. unit" is displayed,
-
Press on "+", "Resol." is displayed,
-
Press on "enter",
-
Select the resolution by pressing on "+" one or more times, the pointer shows the resolution selected,
-
Press "-" two times to come back in measurement mode.
-
The new setting is stored in the permanent memory.
50461/GTEX MMC/1111
UTImeter
Ver x.xx
Battery
ééééé 97%
Init.
*********
25.94°C
+
-
+
E
Settings
LED menu
+
T. unit
+
-
Resol.
Figure 9-4
28
E
>0.0°
-
+
+
-
> 0.00°
UTImeter Gtex MMC
Advertisement
Table of Contents
