Warning Sticker - Makita VC3211H Instruction Manual

Hide thumbs Also See for VC3211H:
Table of Contents

Advertisement

NOTICE:
When moving the cleaner, make sure that the
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage
to the caster.
Cap
There is a cap on the mounting port. The cap prevents
the vacuumed dust from getting out from the cleaner.
ASSEMBLY
WARNING:
This unit may contain hazardous dust. When
replacing filter elements and dust bag, always
use a P2-respirator.
Always be sure that the cleaner is switched off
and unplugged before carrying out any work on
the cleaner.
Never switch on until all filters and dust bag are
completely installed and the volume flow control
is tested.

Warning sticker

Put the warning sticker of your language in the frame of
warning label on the cleaner.
Installing and disposing the
filter bag
WARNING:
Always use a P2-respirator.
When using the filter bag, also use the air filter
together that is preinstalled on the tool. Failure
to use the air filter together may cause unusual
noise and heat, resulting in a fire.
CAUTION:
Never pick up water or other liquids or wet dusts
when using the filter bag. Picking up such things
may cause the filter bag breakage.
► 1. Filter bag
1.
Extend the filter bag.
► 1. Filter bag
2.
Align the filter bag opening with the dust suction
opening of the cleaner.
3.
Insert the cardboard of the filter bag onto the
tool so that it is positioned at the end beyond the
detent protrusion.
When disposing the filter bag, pull the edge on the filter
bag's mouth so that the mouth is closed by a paper.
Connecting a hose
CAUTION:
Never force the hose for bending or stamp it.
Never move the cleaner by a hose. Forcing,
stamping and pulling the hose may cause a
breakage or deformation of the hose.
When picking up large wastes such as planer
carvings, concrete dusts or similar other than
small wastes, use the 38 mm inner diameter
hose (optional accessory). Using the 28 mm
inner diameter hose may cause a hose stuffing
and damage.
Always put the cap on the mounting port when-
ever you remove the hose from the tool.
7 ENGLISH
1
1

Advertisement

Table of Contents
loading

Table of Contents