Makita VC3211H Instruction Manual page 6

The cleaner has a mechanism that prevents water from
immersing into the motor when picking up more than a
certain amount of water.
When the tank is full with liquid, the cleaner emits long
warning beep. Switch off the cleaner and empty the
tank when this beep sounds.
Usage of base hook
CAUTION:
• Be careful not to pinch your fingers when
closing the base hook. Failure to do so may
cause personal injury.
NOTICE:
• Do not apply an excessive force on the base hook.
The excessive force on the base hook may dam-
age the base hook. Close the base hook when not
in use.
Opening the base hook allows the following usage.
1. Storing the power supply cord
► 1. Base hook 2. Power supply cord
NOTICE:
Do not use the cleaner or a connected electric
•
power tool with a power supply cord wound
on the base hook. Using the cleaner or the con-
nected electric power tool with power supply cord
may cause damage the power supply cord.
2. Storing the front cuffs
► 1. Front cuffs
Front cuffs 22, 24 and 38 can be stored (up to two at a
time).
3. Storing the hose
► 1. Hose
4. Resting a reasonable size of
electric power tool for the base hook,
such as circular saw
1
2
Locking or unlocking the caster
3
1
4
► 1. FREE position 2. LOCK position 3. Stopper lever
4. Caster
To lock the caster with a stopper, lower the stopper
lever and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
6 ENGLISH
1
1
2