Makita VC1310L Instruction Manual page 9

Fit two protrusion of the pipe holder into the grooves of
the tank cover and then press down the pipe holder.
1
► 1. Tank cover 2. Hook
NOTE:
• The pipe holder that is excessively lowered than
the intended position cannot be installed on
the cord hook with the hook away from the tank
cover as shown in the figure.
1
2
► 1. Tank cover 2. Hook
NOTE:
• Make sure that the two hooks of the pipe holder
are hooked on the tank cover securely.
Connecting a hose
CAUTION:
• Never force the hose for bending or stamp it.
Never move the cleaner by a hose. Forcing,
stamping and pulling the hose may cause a
breakage or deformation of the hose.
• When picking up large wastes such as planer
carvings, concrete dusts or similars other than
small wastes, use the 38 mm inner diameter
hose (optional accessory). Using the 28 mm
inner diameter hose may cause a hose stuffing
and damage.
2
Insert the hose onto the mounting port of the tank and
turn it clockwise until it locks.
Installing polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
1
► 1. Holder plate 2. Tank
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
9 ENGLISH
2