Makita VC1310L Instruction Manual page 10

1
► 1. Polyethylene bag 2. Holder plate 3. Tank
Spread the bag around the top of the tank.
Hook up the other side of the bag around the top of
the tank so that the prefilter hook can catch and hold it
securely.
NOTE:
• A polyethylene bag available on the market
can be used. The 0.04 mm or thicker one is
recommended.
• Too much dust will tear the bag easily, so do not
collect the dust more than the half of the bag
capacity.
Emptying the polyethylene bag
WARNING:
• Always make sure that the cleaner is switched
off and unplugged before emptying the polyeth-
ylene bag. Failure to do so may cause an elec-
tric shock and serious personal injury.
CAUTION:
• Do not apply a great impact on the powder filter
and tank. Applying a great impact may cause
deformation and damage to powder filter and tank.
• Empty the tank at least once a day although this
depends on picked-up dust volume in the tank.
Or, the suction force will weaken and the motor
may be broken.
• Do not grab the hook when emptying the tank.
Grabbing the hook may cause the hook to break.
► 1. Tank cover 2. Polyethylene bag 3. Hook
Unhook and lift up the tank cover.
2
3
Shake off the dust from powder filter, damper and prefil-
ter and then take the polyethylene bag out of the tank.
NOTE:
• Take the polyethylene bag carefully out of the
tank so that the polyethylene bag cannot be
caught and torn by the protrusion inside the tank
when emptying it.
• Empty the polyethylene bag before it becomes
full. Too much dust in the tank may cause the
polyethylene bag to be torn.
Installing powder filter
6
1
► 1. Tank cover 2. Powder filter 3. Damper 4. Prefilter
5. Tank 6. Mounting position marking
Place the prefilter in the tank.
2
Next, mount the damper on the powder filter and then
place it in the prefilter.
3
When installing powder filter and prefilter, the mounting
position marking on each of them are aligned with that
one at the top of the tank.
Finally, mount the tank cover.
10 ENGLISH
1
2
3
4
5