Table of Contents
Advertisement
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds until "BT PAIR" is shown on the display to
disconnect with your Bluetooth device or turn off Bluetooth
on your Bluetooth device to disable the connection.
You can also press the Source button to select any mode
other than Bluetooth mode to disable the connection.
Deleting Bluetooth paired device
memory
To clear the memory of all paired devices, press and hold
the Bluetooth pairing button more than 5 seconds until
"CLEARING" shows on the display.
TRUE WIRELESS STEREO
(TWS) FUCTION
True wireless stereo (TWS) is a feature that allows one
device to wirelessly connect with another device. You can
use the TWS function to connect it to a second MR005G
and play your music through two speakers.
Set up the first speaker
1. Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
2. Press the Plus button, the display will show "ST/
MULTI". "ST" will flash on the display. Press the Plus
button to enter the "ST PAIR" mode. If no buttons are
pressed for 10 seconds, the speaker will also enter the
"ST PAIR" mode. The display will show "ST PAIR" and
"PAIR" will flash 1 minute.
Set up the second speaker
1. Make sure a second speaker is in Bluetooth mode.
2. Press the Plus button, the display will show "ST/
MULTI". "ST" will flash on the display. Press the Plus
button to enter the "ST PAIR" mode. If no buttons are
pressed for 10 seconds, the speaker will also enter the
"ST PAIR" mode. When the connection is successful,
"L-ST-R" will be shown on both displays at the same
time. The EQ setting will revert to Flat mode (initial
setting).
Note:
Set up the second speaker within 1 minute. If you do not
set it up within 1 minute, the setting of the first speaker will
be canceled.
Start playback
1. Start playback on the connected Bluetooth device and
adjust the volume on the Bluetooth device or one of the
speakers for comfortable listening.
Note:
Volume or EQ (not including MY EQ) adjustment of one
speaker is reflected on the other.
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track and Previous
track buttons on the one of the speakers.
3. Press and hold the Next track or Previous track button
on the one of the speakers to move through the current
track. Release the button when the desired point is
reached.
Switching the audio mode
1. Using two speakers, you can switch between "L-ST-R",
"R-ST-R" and "L-ST-L" mode.
2. Press the L/R button on either of the speakers to
change the audio mode.
3. "L-ST-R" mode: Both speakers play the same sound.
It is the initial setting.
4. "R-ST-R" and "L-ST-L" mode: One speaker plays the
sound on the right channel, while the other speaker
plays the sound on the left channel for stereo playback
between the speakers.
Disconnecting the TWS Function
Press and hold the Plus button to disconnect the TWS
function.
ENJOYING WIRELESS
PLAYBACK USING MULTIPLE
SPEAKERS
You can enjoy music at the same time by combining up to
10 devices which are compatible with this function.
Set up the first speaker
1. Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device.
2. Press the Plus button, the display will show "ST/
MULTI".
3. Select "MULTI" by pressing the L/R button. "MULTI" will
flash on the display. Press the Plus button to enter "MUL
PAIR" mode. If no buttons are pressed for 10 seconds,
the speaker will also enter the "MUL PAIR" mode. The
display will show "MUL PAIR" and "PAIR" will flash 1
minute.
Connect the second and more speakers
1. Make sure the multiple speakers are all in Bluetooth
mode.
2. Press the Plus button, the display will show "ST/
MULTI".
3. Select "MULTI" by pressing the L/R button. "MULTI"
will flash on the display. Press the Plus button to enter
the "MUL PAIR" mode. If no buttons are pressed for 10
seconds, the speaker will also enter the "MUL PAIR"
14
Advertisement
Table of Contents
