Start Sewing; How To Finish Stitches - AEG 225/7 LCD Instruction Book

START SEWING

Important hints:
1. Raise the take-up lever to its highest position before starting and after finishing sewing.
2. Hold both threads about 10 cm to the rear of the machine for the first two or three stitches.
3. Sufficient fabric should be placed under needle before lowering the presser foot.
4. Press foot/speed control and start to sew.
5. Test the machine stitches on a piece of fabric you plan to use, to have a suitable tension and
length of the stitch for your fabric.
6. Separate the machine from the power system if you leave it unsupervised.
Attention:
1. When turning the balance wheel manually, always turn it toward you.
2. Guide the cloth gently with your hand.
3. To prevent breaking needles, always raise the needle out of the fabric when you stop sewing.

HOW TO FINISH STITCHES

1. Sew to the edge of seam.
2. Push the reverse button and sew in reverse for about 3-4 stitches and back.
3. Raise needle into its highest position.
4. Lift the presser foot and pull the fabric out of the back of the machine.
Thread cutter
5. Cut threads as shown on the thread cutter.
18