Honda Civic 2016 Manual page 567

uuIf a Tyre Goes FlatuChanging a Flat Tyre
■
Getting Ready to Replace the Flat Tyre
Spare Tyre
The tyre to be replaced.
566
1. Open the boot floor lid.
2. Take the tool case out of the boot. Take the
Tool Case
jack and wheel nut wrench out of the tool
case.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tyre.
4. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tyre.
Wheel
Blocks
1Getting Ready to Replace the Flat Tyre
WARNING: The jack can only be used for helping an
emergency vehicle breakdown, not for changing the
regular seasonal tyre or any other normal
maintenance or repair operation.
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.