Honda Civic 2016 Manual page 467

uuWhen DrivinguDeflation Warning System
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
* Not available on all models
466
*
You can calibrate the system from the
customized feature on the audio/information
screen.
1. Turn the ignition switch to ON
2. Select .
3. Select Settings.
4. Select Vehicle.
5. Select Deflation Warning System.
6. Select Cancel or Initialise.
• If the Failed message appears, repeat steps
4-5.
• The calibration process finishes
automatically.
1Deflation Warning System Calibration
•
Deflation Warning System cannot be calibrated if a
compact spare tyre
•
*1 . The calibration process requires approximately 30
( w
minutes of cumulative driving at speeds between
48−105 km/h.
•
During this period, if the ignition is turned on and
the vehicle is not moved within 45 seconds, you
may notice the low tyre pressure/deflation warning
system indicator comes on briefly. This is normal
and indicates that the calibration process is not yet
complete.
If the snow chains are installed, remove them before
calibrating the deflation warning system.
If the low tyre pressure/deflation warning system
indicator comes on even when the properly inflated
specified regular tyres are installed, have the vehicle
checked by a dealer.
We recommend that the tyres be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.
The low tyre pressure/deflation warning system
indicator may come on after re-connecting the
battery. Drive a short distance at more than 20 km/h.
The indicator should go off. If it does not, have your
vehicle checked by a dealer.
* is installed.