Sony ZRD-1 Installation Manual page 151

3. Select "HDMI1" or "HDMI2" in [Input Signal], and then click [Common Input Settings].
The Common Input Settings screen is displayed.
Screen example
4. Set the video input level in [Dynamic Range] as required.
[Auto]: Discriminates the video input level automatically.
[Limited]: Select this when the video input level is in the range of 16 to 235.
[Full]: Select this when the video input level is in the range of 0 to 255.
5. Set the signal format in [HDMI Signal Format] as required.
[Enhanced Format]: Displays the video in the HDMI format with higher precision.
[Standard Format]: Displays the video in the standard HDMI format.
n
If the source equipment in the system does not support HDMI 2.0, select "Standard Format".
6. Click [Close].
The Common Input Settings screen is closed.
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-55 (E)