Makita DUC252 Instruction Manual page 11

Recommended cord connected power source
Battery adapter
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used for
the equipment. Be sure that you understand their
meaning before use.
• Read instruction manual.
• Wear eye protection.
• Wear ear protection.
• Wear a helmet, goggles and ear
protection.
• Use appropriate protection for foot-leg
and hand-arm.
• This saw is to be used by properly
trained operators only.
• Do not expose to rain.
• Maximum permissible cut length
• Direction of chain travel
• Saw chain oil adjustment
• Only for EU countries
Ni-MH
Due to the presence of hazardous
Li-ion
components in the equipment, waste
electrical and electronic equipment,
accumulators and batteries may have a
negative impact on the environment and
human health.
Do not dispose of electrical and
electronic appliances or batteries with
household waste!
In accordance
Directive
electronic
accumulators and batteries and waste
accumulators and batteries, as well as
their adaptation to national law, waste
electrical
accumulators
separately and delivered to a separate
collection point for municipal waste,
operating
regulations
protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
END313-3
with the European
on waste electrical
equipment and
equipment, batteries
should be stored
in accordance with
on environmental
• Guaranteed
• Sound
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
General power tool safety warnings
WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Cordless Chain saw safety warnings
1. Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw chain
is not contacting anything. A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the saw
chain.
2. Always hold the chain saw with your right hand
on the top handle and your left hand on the front
handle. Holding the chain saw with a reversed hand
configuration increases the risk of personal injury
and should never be done.
3. Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
and
electric shock.
on
4. Wear safety glasses and hearing protection.
Further protective equipment for head, hands, legs
and feet is recommended. Adequate protective
clothing will reduce personal injury by flying debris or
and
accidental contact with the saw chain.
5. Always keep proper footing.
6. When cutting a limb that is under tension be
alert for spring back. When the tension in the wood
the
fibres is released the spring loaded limb may strike
the operator and/or throw the chain saw out of
control.
7. Use extreme caution when cutting brush and
saplings. The slender material may catch the saw
chain and be whipped toward you or pull you off
balance.
BAP182
sound
according to EU Outdoor
Directive.
power level
Australia NSW Noise
Regulation.
power level
Noise
according to
Control
ENE090-1
GEA010-2
ENB137-1
11