Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. Content Delivery Engine CDE100
  6. Hardware installation manual

Cisco CDE100 Hardware Installation Manual

Content delivery engine
Hide thumbs Also See for CDE100:

Advertisement

Quick Links

Download this manual
Cisco Content Delivery Engine
Hardware Installation Guide
August 2007
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO
CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS
MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY
PRODUCTS.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-13478-01

Advertisement

loading

Related Manuals for Cisco CDE100

Summary of Contents for Cisco CDE100

  • Page 1 Cisco Content Delivery Engine Hardware Installation Guide August 2007 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...
  • Page 3 C H A P T E R Before You Begin Installation and Configuration Order Running the BIOS Setup Utility Running the BIOS Setup Utility for the CDE-100 Running the BIOS Setup Utility for the CDE-200 Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 4 A P P E N D I X CDE Server Connectors Serial Console Interface Connector Pin Assignments Serial Port Connector Ethernet Connector Pin Assignments Ethernet Port Connector Cable Pin Assignments N D E X Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 5 2.0 software application suite onto the CDEs, and the initial configuration of the CDE using the Content Delivery System Manager (CDSM). Chapter 4, “Hardware Troubleshooting” Presents troubleshooting procedures for the CDS. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 6 Lists the connector pin assignments for the CDEs. Objectives This guide documents the hardware features of the Cisco Internet Streamer (CDS) release 2.0, which consists of the CDE-100 and CDE-200 when used only in Internet Streaming applications. It describes the physical and performance characteristics of each CDE, explains how to install a CDE, and provides troubleshooting information.
  • Page 7 For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 8 Preface Cisco Content Delivery Engine Hardware Installation Guide viii OL-13478-01...
  • Page 9 Overview of Content Delivery Engines This chapter provides an overview of the Content Delivery Engines (CDEs) and describes the hardware features. The Cisco Internet Streamer Content Delivery System (CDS) release 2.0 CDEs are the CDE-100 and CDE-200 servers. Figure 1-1...
  • Page 10 This is a hardware reset button and does not restore the device to the factory default software settings. CD eject Opens the CD drive tray. Figure 1-6 shows the CDE-200 front panel, and describes the front panel control buttons. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 11 Associated hard disk drive is in use. Ethernet port 1 Blue Port is connected. Ethernet port 2 Blue Port is connected. CD-ROM drive activity Blue CD-ROM drive is in use. Reset Blue Reset is in progress. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 12 The CDEs support the following I/O connectors on the rear of the device: Ethernet connectors • Serial connector • Video and audio connectors (on optional adapter) • Figure 1-9 shows the location of the CDE-100 back panel ports and connectors. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 13 Universal Serial Bus [USB]). However, the keyboard and mouse are supported by the BIOS for POST, and the BIOS Setup Utility as described in Chapter 3, “Installing the Software and Initially Configuring a CDE.” Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 14 3/0 and 4/0, and the interfaces on the NICs are detected as 1/0, 2/0, 5/0, and 6/0. The interface numbering must be taken into consideration when configuring IP addresses and port-channels. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 15 These warnings are translated into several languages in the Regulatory Compliance and Safety Information for the Cisco Internet Streamer CDS 2.0 document that ships with the servers. Read the installation instructions before you connect the system to its power source.
  • Page 16 AS/NZS 3260. Incorrectly connecting this equipment to a general purpose outlet could be hazardous. The telecommunications lines must be disconnected 1) before unplugging the main power connector and/or 2) while the housing is open. Statement 185 Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 17 Additional regulatory compliance and legal requirements may apply for direct connection to the Cable Distribution System. This product may connect to the Cable Distribution System ONLY through a device that is approved for direct connection. Statement 1078 Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 18 Before installing a CDE-100 in the rack, ensure the following hardware configuration is set: All dip switches are set in the OFF (down) position. • CD-ROM drive is connected to the primary IDE cable. • Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 19 At least two people are required to lift the unit and place it at the desired position in the rack; holding it steady. A third person secures the unit into the rack. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 20 Chassis power inlets accept AC (120 V or 220 V) or –48 VDC. • Power modules are hot swappable. • The CDE-100 chassis contains one VAC or VDC power port; the CDE-200 chassis contains two • VAC or VDC power ports. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 21 3/0 and 4/0, and the interfaces on the NICs are detected as 1/0, 2/0, 5/0, and 6/0. The interface numbering must be taken into consideration when configuring IP addresses and port-channels. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 22 The hard drives on the CDE-100 are monitored using Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) and statistics are displayed through the Administrative Interface, as well as sent to the CDSM. For more information about S.M.A.R.T., see the Cisco Internet Streamer CDS 2.0 Software Configuration Guide.
  • Page 23 Insert a new disk drive into the drive tray slot and make sure it is properly seated. Step 7 Close the latch completely and lock it in place by pressing the safety lock button. Figure 2-6 Chassis Drive Tray Installation and Removal Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 24 Chapter 2 Installing the CDEs Installing the CDEs Cisco Content Delivery Engine Hardware Installation Guide 2-10 OL-13478-01...
  • Page 25 C H A P T E R Installing the Software and Initially Configuring a This chapter describes the initial installation of the Cisco Internet Streamer CDS release 2.0 software application suite, and the initial configuration of the CDE. This chapter contains the following sections: Before You Begin, page 3-1 •...
  • Page 26 3/0 and 4/0, and the interfaces on the NICs are detected as 1/0, 2/0, 5/0, and 6/0. The interface numbering must be taken into consideration when configuring IP addresses and port-channels. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 27 To enter the BIOS Setup menu, press Delete as instructed at the bottom of the BIOS screen. The Main Step 4 menu appears (see Figure 3-3). Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 28 Figure 3-4). Step 5 Figure 3-4 Boot Settings Menu From the Boot Settings Menu, choose Boot Settings Configuration and press Enter. The Boot Settings Step 6 Configuration screen appears (see Figure 3-5). Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 29 The devices must be in the correct order for the installation to be successful. Step 9 Use the Down arrow key to expand the hard disk drives and expose its subelements (see Figure 3-7). Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 30 Choose IDE Configuration and press Enter. The IDE Configuration screen appears (see Figure 3-9). Figure 3-9 IDE Configuration Screen Set the IDE Configuration option to P-ATA Only. Set the S-ATA Running Enhanced Mode option to No. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 31 Set the Redirection after BIOS POST option to Disabled. Step 14 When you are finished, navigate to the Exit submenu and choose Save Changes and Exit. Press OK when prompted (see Figure 3-12). Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 32 Confirm that the BIOS detected the flash device. If the BIOS detects the CD-ROM drive but the CD installation menu is not displayed, this is an abnormal condition. Contact Cisco Technical Support. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 33 Ctrl-Backspace functions the same as the Delete key if you are viewing the initial BIOS screen through a remote terminal server. Use the arrow keys to navigate to the Advanced menu and press Enter. The Advanced menu appears (see Step 6 Figure 3-14). Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 34 Set the Quiet Boot option to Disabled. Set the After Power Failure option to Power On. Use the Down arrow key to expand +Hard Drive and expose its subelements (see Figure 3-16). Step 8 Cisco Content Delivery Engine Hardware Installation Guide 3-10 OL-13478-01...
  • Page 35 Main Menu Note On the CDE-200, the Primary IDE Master is connected to 80 GB hard drive (not used), and the Secondary IDE Master is connected to 128 MB compact flash. Cisco Content Delivery Engine Hardware Installation Guide 3-11 OL-13478-01...
  • Page 36 CD-ROM drive is not present in the above Hard Drive element list. Press the Reset button (not the Power button) and try again. If it still fails, try a different USB CD-ROM drive. Cisco Content Delivery Engine Hardware Installation Guide 3-12...
  • Page 37 Installing the Software If the USB CD-ROM drive is still not detected (not shown), press the Reset button again. If you are still unable to detect the CD-ROM drive at the BIOS level, contact Cisco Technical Support at this URL: www.cisco.com/techsupport...
  • Page 38 Enter the following commands to assign a primary interface: CDE# configure CDE(config)# primary-interface GigabitEthernet 1/0 Running the Setup Utility Use the Setup utility to configure the network settings and register the CDEs with the CDSM. Cisco Content Delivery Engine Hardware Installation Guide 3-14 OL-13478-01...
  • Page 39 Launch a web browser and enter the CDSM IP address. The CDSM Login page appears (see Figure 3-20). Enter admin as the username and default as the password and press Login. Step 2 Cisco Content Delivery Engine Hardware Installation Guide 3-15 OL-13478-01...
  • Page 40 3-21). Figure 3-21 Main Menu From the CDSM Main menu, choose the Devices tab. A list of all your registered Service Engines and Step 3 Service Routers appears (see Figure 3-22). Cisco Content Delivery Engine Hardware Installation Guide 3-16 OL-13478-01...
  • Page 41 CDE(config)# no cms enable CDE(config)# cms enable The installation is now complete. Refer to the Cisco Internet Streamer CDS 2.0 Software Configuration Guide for information on configuring and using the CDS. See the “Related Documentation” section on...
  • Page 42 Chapter 3 Installing the Software and Initially Configuring a CDE Verifying the CDSM Cisco Content Delivery Engine Hardware Installation Guide 3-18 OL-13478-01...
  • Page 43 C H A P T E R Hardware Troubleshooting This chapter presents troubleshooting procedures for the Cisco Internet Streamer CDS release 2.0 hardware. The following sections show the symptoms, probable causes, and recommended actions for a variety of problems. Troubleshooting Ethernet Adapters If you are having problems with any of your adapters, use the following steps to isolate the problem: Make sure the power is applied to the system.
  • Page 44 “Installing or Removing Disk Drives” section Chapter 2, Step 2 “Installing the Servers”). If the problem still persists, swap the drive in question. If the problem still persists, contact Cisco Step 3 Technical Support at this URL: www.cisco.com/techsupport Cisco Content Delivery Engine Hardware Installation Guide...
  • Page 45 Redundant with operation alarm monitored by system Operating Temperature 32 to 122°F (0 to 50°C) Humidity 5 to 95% noncondensing Short-term Humidity 5 to 98% (96 hours) Altitude –197 to 13120 ft (–60 to 4000 m) Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 46 2 Gbps maximum Ports Console port: DB-9 RS-232 10/100/1000 Mbps Ethernet interface: RJ-45 (management) Input Cables For console port: DB-9 female serial cable For Ethernet interface: RJ-45 category 5E or higher cable Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 47 CDE-200 server. Figure B-1 CDE-100 Connector Locations Power connector VGA interface Mouse connector GigabitEthernet 1/0 Keyboard connector GigabitEthernet 2/0 Serial console interface Do not install cables for any “not used” ports. Caution Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 48 Data Carrier Detect; input Receive Data; input Transmit Data; output Data Terminal Ready; output Interface signal ground Data Set Ready; input Ready To Send; output Clear To Send; input Ring Indicator; input Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 49 BI_DD+ Brown Unused BI_DD– Table B-3 Ethernet Connector Pin Assignments for T568B RJ-45 Wire Color Wire Diagram 10BASE-T 1000BASE-T (T568B) (T568B) 100BASE-T Signal White/Orange Transmit+ BI_DA+ Orange Transmit– BI_DA– White/Green Receive+ BI_DB+ Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 50 RJ-45 connector on the back of the device. The 100BASE-TX/1000BASE-TX Ethernet standard requires that the cabling in the network be Note Category 5 or higher. Figure 2-4 shows the pin number assignments for the Ethernet RJ-45 port. Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 51 RJ45 straight-through and RJ-45 crossover cable, respectively Figure B-5 Pin Assignments for RS-232 Null Modem R X D G N D TO HOST COMPUTER DB-9 (Female) DB-9 (Female) End view End view Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 52 Pin Assignments and Wiring for an RJ-45 Straight-Through Cable White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown Figure B-7 Pin Assignments and Wiring for an RJ-45 Crossover Cable White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown Cisco Content Delivery Engine Hardware Installation Guide OL-13478-01...
  • Page 53 CDEs 3-14 verifying 3-15 CDE-100 verifying devices 3-17 CDE-200 Cisco Technical Assistance initially configuring 3-1, 3-14 configuration overview assigning a primary interface 3-14 registering with CDSM 3-14 3-14 server types Cisco Content Delivery Engine Hardware Installation Guide IN-1 OL-13478-01...
  • Page 54 1-2, 1-3 GigabitEthernet 3/0 ports GigabitEthernet 4/0 ports devices GigabitEthernet 5/0 verifying with the CDSM 3-17 ports disk drives GigabitEthernet 6/0 CDE-100 ports CDE-200 IDE compact flash 3-1, 3-13 installing location Cisco Content Delivery Engine Hardware Installation Guide IN-2 OL-13478-01...
  • Page 55 Serial console interface software installation order ports tools and parts description interfaces Gigabit Ethernet stream GigabitEthernet 1/0 GigabitEthernet 2/0 GigabitEthernet 3/0 GigabitEthernet 4/0 LEDs GigabitEthernet 5/0 CDE-100 GigabitEthernet 6/0 CDE-200 Cisco Content Delivery Engine Hardware Installation Guide IN-3 OL-13478-01...
  • Page 56 3-15 video connector safety warnings serial connector Serial console interface serial ports connector pinout description server types CDSM Service Engine, see SE Service Router, see SR specifications CDE-100 CDE-200 management technical Cisco Content Delivery Engine Hardware Installation Guide IN-4 OL-13478-01...

This manual is also suitable for:

Cde200