Components
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU35051
Top cowling lock lever (turn type)
To remove the top cowling, turn the front and
side lock levers to release them and lift off
the cowling. Reverse this procedure when
reinstalling the top cowling.
32
ZMU05824
When installing the cowling, align the 3 posi-
tions of the grommets to fit the cowling in the
rubber seal.
When installing the cowling, check to be sure
it fits properly in the rubber seal.
Be sure to check that the gap between the
ZMU05852
ZMU05853
ZMU05934