Bolt tightening torque:
8.0 Nm (0.8 kgf-m, 5.8 ft-lb)
11. Connect the water detection switch cou-
pler securely until a click is heard.
1. Water detection switch coupler
12. Securely attach the water detection
switch coupler to the holder.
13. Connect the lead to the holder.
14. Install the top cowling.
15. Start the engine and make sure that the
EMU33501
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
ZMU05895
some corrosion may begin almost immedi-
ately. NOTICE: Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
1
ZMU05897
ZMU05898
Trouble Recovery
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
[ECM00401]
101