Tripp Lite NGI-S04C2 Owner's Manual page 130

for the timeserver for up to 60 seconds.
Select the time difference between UTC (Universal Time
Time Zone Coordinated, formerly known as GMT, Greenwich Mean Time)
and your time zone.
Daylight Saving Settings
Select Enable if you want to use Daylight Saving Time.
State
Otherwise, select Disable to turn it off.
Configure the day and time when Daylight Saving Time starts
if you enabled Daylight Saving Time. The time is displayed in
the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States
on the second Sunday of March. Each time zone in the United
States starts using Daylight Saving Time at 2 A.M. local time.
So in the United States you would select Second, Sunday,
3(March) and 2:00.
Start Date
Daylight Saving Time starts in the European Union on the last
Sunday of March. All of the time zones in the European Union
start using Daylight Saving Time at the same moment (1 A.M.
GMT or UTC). So in the European Union you would select
Last, Sunday, 3(March) and the last field depends on your
time zone. In Germany for instance, you would select 2:00
because Germany's time zone is one hour ahead of GMT or
UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if
you enabled Daylight Saving Time. The time field uses the 24
hour format.
Here are a couple of examples:
Daylight Saving Time ends in the United States on the last
Sunday of October. Each time zone in the United States stops
using Daylight Saving Time at 2 A.M. local time. So in the
End Date
United States you would select First, Sunday, 11(November)
and 2:00.
Daylight Saving Time ends in the European Union on the last
Sunday of October. All of the time zones in the European
Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would
select Last, Sunday, 10(October) and the last field depends on
your time zone. In Germany for instance, you would select 2:00
130