Honeywell T775A Series Installation Instructions Manual page 29

SETUP
OUTPUTS
FLOAT 1
DERIVATIV
Fig. 69. Setup - Outputs - Floating Relay - Derivative.
SETUP
OUTPUTS
RELAY 1
SCHEDULE
Fig. 70. Setup - Outputs - Relay - Schedule.
SETUP
OUTPUTS
RELAY 1
RESET RT
Fig. 71. Setup - Outputs - Relay - Reset Runtime.
All manuals and user guides at all-guides.com
T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
2.3.4.1.1.3. DERIVATIVE
SETUP
OUTPUTS
FLOAT 1
relay only)
DERIVATIV
The Derivative option displays only on the T775B2016,
T775B2024, T775B2032, and T775B2040 models when
the Type option = Floating.
0
1. From the menu, use the
SEC
2. Press the
ENTER
DERIVATIVE
3. Use the
TIME FOR
FLOAT 1
M24531
4. Press the
Continue with "2.3.4.2. SCHEDULE" for the remaining
relay selections.
2.3.4.2. SCHEDULE
SETUP
OUTPUTS
RELAY 1
This selection displays only if "Use Sched = YES" is
SCHEDULE
selected during the Output Options setup (see "2.3.3.1.
YES
USE SCHED" on page 25). When selected, individual
NO
outputs default to follow the schedule.
1. Press the
2. Use the
USE
3. Press the
SCHEDULE
FOR
OUTPUTS
M24532
An individual output can be selected to be controlled or
not controlled by the schedule.
If NO is selected, the Setback selection does not appear
in the Program menu for this output.
2.3.4.3. RESET RT
SETUP
OUTPUTS
RELAY 1
This selection displays only if "Show RT = YES" is
RESET RT
selected during Output Options setup (see "2.3.3.4.
YES
SHOW RT (show run time hours)" on page 26).
NO
1. From the Relay menu, press the
2. Use the
RESET
3. Press the
RUN TIME
FOR
RELAY 1
M24533
Selecting YES immediately resets the output run time
hours to zero for this output. When you subsequently
return to this screen, the RESET RT defaults to NO.
NOTE: Run times can be reset to zero for each
29
(modulating/floating
highlight DERIVATIV.
button to display the actuator value.
and buttons to increase/decrease
the desired number of seconds.
Default: 0 seconds
Range: 0 to 3,600 seconds)
button to accept the value and display
the SCHEDULE option.
button to display the Schedule values.
and buttons to select YES or NO.
Default: YES
button to accept the value and return
to the Relay menu.
(run time hours)
play the Reset RT values.
and buttons to select YES or NO.
Default: NO
button to accept the value and return
to the Relay menu.
individual relay. You must do this for each
relay that you want to reset to zero.
and buttons to
button to dis-
62-0254—13