Bosch Solution 2000 Programming page 8

•
181 (default number = 1)
•
182 (default number = 2)
•
183 (default number = 3)
•
184 (default number = 4)
You need to change the number in each location to change the installer code.
The following example will show you how to change the installer code from 1 2 3 4
to 6789:
1. Enter programming mode:
2. Go to the location for the first number:
3. Change the 1 to a 6:
4. Go to the location for the second number:
5. Change the 2 to a 7:
6. Go to the location for the third number:
7. Change the 3 to an 8:
8. Go to the location for the fourth number:
9. Change the 4 to a 9:
10.Save and exit: [ 9 6 0 # ]
The installer code has now been changed to 6 7 8 9, so you will need to press [ 6 7 8 9
# ] in order to enter programming mode. However, we will continue to use the default
installer code of 1 2 3 4 throughout this guide.
VIII. Add/Delete User Codes
User codes are also stored across four locations, but you can change them easily by using
the master code (MC) operation [ MC 1 # ] and changing the code for the required user.
Since User 1 is a master code by default, it can be used to complete this operation.
For example, to change the code for User 1 from 2 5 8 0 to 3 0 1 5:
1. Enter the user
2. Specify the user number (1 - 32) you want to change the code for:
3. Enter the new code:
The code for User 1 has been changed to 3 0 1 5, however, we will continue using the
default master code of 2 5 8 0 throughout this guide.
If you wish to delete a user code:
1. Enter the user
[ 1 2 3 4
[ 6 * ]
[ 7 * ]
[ 8 * ]
[ 9 * ]
master code operation:
[ 3 0 1 5 # ]
master code operation:
# ]
[ 1 8 1 # ]
[ 1 8 2 # ]
[ 1 8 3 # ]
[ 1 8 4 # ]
[ 2 5 8 0 1 # ]
[ 2 5 8 0 1 # ]
[ 1 # ]
Page !8 of !12