Bosch Solution 3000 Instructions

Learning in wireless keyfob to the Solution 3000
Add or Delete RF Wireless Keyfob
Add WE800EV2 Keyfob
Notice! Learn all WE800EV2 keyfobs via WE800EV2 receiver Learn/Delete button before adding the WE800EV2
keyfobs to the system. Refer WE800EV2 manual for learn/delete fobs.
Notice! Set RF receiver as WE800EV2 Receiver (Value 2 in Location 395)
1
• Enter the Master Code,
followed by [1] and the
[#] key (for example,
[25801#]).
5
• Enter [#] key to confirm
the operation, or press [*]
to cancel
Delete WE800EV2 Keyfob
1
• Enter the Master Code,
followed by [1] and
the [#] key
2
• Enter the WE800EV2 keyfob number (301 to 332) you want
to add (301 = keyfob 1, 302 = keyfob2, etc.), followed by
the [#] key. Up to 21 WE800EV2 keyfobs can be added, but
only current keyfob number (1 to 16) displays through zone
indicators on the ICON codepad
4
• When icon numbers (1 to
16) flash, press button 1 or
2 of the keyfob. The panel
learns the WE800EV2 Keyfob
ID number and the last digit
of RFID number displays on
the codepad. Press [#] key
to confirm
2
• Enter the WE800EV2
keyfob number (301
to 332) you want to
delete, followed by the
[#] key
3
• The user number will
display on the codepad.
Press [#] to continue
3
• Press the [*] key to
delete the WE800EV2
Keyfob