Product Overview; Application; Integrated Reader; Features - Honeywell 013080 Mounting And Connection Instructions

Mounting and Connection Instructions MB TouchScreen ControlPanel
1.

Product overview

013080 MB TouchScreen ControlPanel, white,
for panel series MB-12, 561-MB24/48/100/256 plus and MB-Secure.
consist of:
- MB TouchScreen
- back case
- Mounting material
013081 as 013080, but color black
1.1

Application

The information communication devices MB TouchScreen ControlPanel 01308x are meant to work
with the MB-Secure series of control panels.
instructions can also be used with control panels in the
e.g. as a supplement or replacement for BUS-2 control units already installed.
The operating and display units enable a wide range of applications. The necessary mounting
accessories for cavity wall installation are included in the respective scope of delivery.
The MB TouchScreen ControlPanel
BUS-2 (013220.07.10).
2.

Integrated reader

An IK2/proX1, IK3/proX2, mifare and mifare
DESFire EV1 and EV2 card reader for user
authorization is integrated into the MB-
TouchScreen ControlPanel.
Hold the data carrier in front of the device -
approximately in the middle of the Honeywell
logo. There is the reading field.
Whether a data carrier is required for the
authorization, will be determined on the panel
programming.
The following combinations are possible:
- Only PIN
- Only data carrier
- PIN and/or data carrier
The reader can be used at the panels MB-Secure (from V10.xx).
3.

Features

• Modern Tab design.
• Reader for IK2/proX1 and IK3/proX2 data carriers integrated.
• Reader for mifare / mifare DESFire EV1 and EV2 data carriers integrated.
• LED´s (red, green, yellow and blue) to display status.
• Connection via BUS-2.
• Surface-mounted, and cavity wall installation possible.
ControlPanel, front device, including electronics
The MB TouchScreen ControlPanel
must not be used
MB-12/ 561-MB24/48/100
in conjunction with the loop module
Reading range
15
described in these
/256 plus series , e.g.