IPGSM-4G Commercial Fire Communicator – Installation and Setup Guide
PowerBoost1 Information
LED Indicator
AC (green)
ACTIVE (green)
LOW BATT (yellow)
TROUBLE (yellow)
Notes:
If AC power is lost and the battery voltage falls below 10v, the PowerBoost1 output voltage will be turned
•
off. The output power is turned back on when AC power is restored.
You must use the DIP switch settings shown below.
•
STATUS
AC power available.
Cyclical flashing – normal communications.
Repetition of 3 flashes – loss of communications.
Missing or low battery.
One or more trouble conditions exist, such as; overload, output supervi-
sion, ground fault, or charger failure.
– 9 –