Sending The Same Document To Several Fax Numbers (Sequential Broadcasting) - Canon L240 User Manual

Sending the Same Document to Several Fax
Numbers (Sequential Broadcasting)
This feature, also called Sequential Broadcasting, allows you to send the same
document to several fax numbers in one operation. Simply load the document, enter
the fax numbers, and the FAX will then scan the document into its memory and send
the document to all the fax numbers you entered, one after the other.
You can send the same document to as many as 125 fax numbers using this feature.
Please note, however, that the fax numbers you enter must be registered for one-touch
or coded speed dialling (
using regular dialling (i.e. with the numeric buttons).
If you frequently send documents to the same group of fax numbers, you can register
these numbers for group dialling instead. This will simplify dialling (
Note
Follow this procedure to send the same document to several fax numbers:
1
Load the document, face down in the ADF
(
•
•
2
Enter up to 125 fax numbers using any of the
following methods:
❏ One-touch speed dialling:
❏ Coded speed dialling:
❏ Regular dialling:
7-12 Sending Faxes
Chapter 6). You will only be able to enter one fax number
p. 4-3).
To adjust the resolution and contrast,
see pp. 7-2, 7-3.
You may be unable to send if the memory
used (shown in the LCD) is close to
00%
. To free up space in the FAX's
memory: print, send, or delete any
documents you no longer need to be
stored in memory (
Press the one-touch speed dialling
button(s) you want.
Press Coded Dial, then use the numeric
buttons to enter the two-digit code you
want. Repeat for other codes.
• Be sure to press Coded Dial before
each code.
Use the numeric buttons to enter the fax
number you want, then press Set.
• You can only enter one fax number
this way.
p. 9-5).
p. 6-13).
Ex: MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Ex:
TEL=905 795
Ex:
0
Ex:
TEL=03 3758 2
Ex:
TEL= 2 887 0 66
Chapter 7