Cancelling Sending; Automatic Dialling; Sending A Document Using One-Touch Speed Dialling Or Coded Speed Dialling Numbers; Sending A Document Using Directory Dialling - Canon FAX-B840 User Manual

Cancelling sending

1 Press [Stop].
• When you cancel sending, you may need to press [Start/Copy] for a few seconds, then the fax will feed out the
document.
• You can set whether or not the fax prints an ERROR TX REPORT (see p. 50).

Automatic dialling

Sending a document using one-touch speed dialling or
coded speed dialling numbers
To use this feature you must first register numbers for one-touch speed dialling (see pp. 19, 20) or coded speed
dialling (see p. 20).
1 Load the document face up into the document tray (see p. 24).
2 Press the one-touch speed dialling button under which the number
you wish to fax is registered.
-or-
Press [Coded Dial/Directory] and enter the appropriate two-digit coded speed dialling code.
• The registered name and number appear.
• If you make a mistake, press [Stop]. Then press the correct one-touch speed dialling button or press [Coded Dial/Directory] and
re-enter the code.
3 Press [Start/Copy].
The fax begins sending.

Sending a document using directory dialling

This procedure can be used to look up the other party's name and retrieve the number for dialling.
1 Load the document face up into the document tray (see p. 24).
2 Press [Coded Dial/Directory] twice.
3 Press a numeric button to enter the first letter of the name of the party
you are searching for.
28
TEL=905 795 XXXX
DIRECTORY DIAL
01 Canon CANADA