Tx (Transmission) Settings Menu - Canon L240 User Manual

TX (Transmission) SETTINGS Menu

For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
CM TX
MID PAUS S T
AUTO R DIAL
R DIAL TIM S
R DIAL INT RVAL
TIM OUT
14-6 Summary of Settings
Description
Enables/disables Error Correction Mode (ECM) during
transmission.
Selects the length of a pause entered within a fax/
telephone number with the Redial/Pause button.
Enables/disables automatic redialling if the other party's
line is busy on the first attempt (
Selects the number of redial attempts.
Selects the time interval between redial attempts.
Enables/disables automatic scanning of documents after
the fax number is entered.
N
: Scanning begins automatically five seconds after
entering the fax number (10 seconds if sending to multiple
fax numbers).
FF
: Scanning does not start automatically. (You need to
press Start/Copy to begin scanning.)
Sub-Settings
ON
OFF
2 S C
(1
ON
OFF
p. 7-9).
2 TIM S
(1
2 MIN.
(2
ON
OFF
15)
to
10)
to
99)
to
Chapter 14