Special Dialling; Entering Pauses In A Fax/Telephone Number - Canon L240 User Manual

Special Dialling

Entering Pauses in a Fax/Telephone Number

You may need to enter pauses in a fax/telephone number in the following situations:
– When you dial or register an overseas number. The length and position of the
pause depends on the telephone system of your country.
– When your FAX is connected to a switchboard. For details, see p. 3-9.
Follow this procedure to enter pauses during regular dialling or when registering a
number for speed dialling:
1
When you come to the step that requires you
to enter the fax/telephone number, use the
numeric buttons to enter the number up to
where a pause is necessary.
•
2
Press Redial/Pause to enter a pause.
•
•
3
Continue entering the rest of the fax/
telephone number with the numeric buttons.
•
4
To enter a pause at the end of the number,
press Redial/Pause.
•
5
Continue with the operation you are
performing.
The duration of a pause varies depending on the country.
*
9-2 Special Features
If you enter the wrong number, press
Clear, then enter the correct number.
A pause entered within a number (p) is
two seconds* long.
For a longer pause, press Redial/Pause
again for another two-second* pause.
Alternatively, you can change the length
ID PAUSE SET
of the pause (
p. 14-6).
If you enter the wrong number, press
Clear and start again from step 1.
A pause at the end of a number (P) is
fixed to ten seconds.
Ex:
TEL=
Ex:
TEL=
,
Ex:
TEL=
Ex:
TEL=
00
00P
00p811234
00p811234P
Chapter 9