Rx (Reception) Settings Menu - Canon L240 User Manual

RX (Reception) SETTINGS Menu

For details on accessing the settings below, see p. 14-3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
CM RX
RX MOD
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIM
R MOT RX
R MOT RX ID
M MORY RX
RX PAG FOOT R
* This setting is available for certain countries only.
INCOMING RING
** Even if you have set
handset or a telephone to your unit.
Chapter 14
Description
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode (
AX/TEL AUTO SW
If you select
additional sub-settings ( p. 8-5).
RX MODE
When the setting is set to
AX/TEL AUTO SW
, this setting enables/disables ringing
when the FAX receives a call.**
Selects the number of rings before the FAX begins
receiving.
When the receive mode is set to
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
ON
If you select above, this setting selects the length of
time the FAX rings before switching to fax receive mode.
Enables/disables remote receiving.
ON
If you select above, this setting selects the remote
receiving ID.
Enables/disables reception of a document in the FAX's
memory when a problem occurs during reception.
Enables/disables printing of the reception date and time,
page number, and transaction number (TX/RX NO.) at the
bottom of each received fax page.
ON
to , ringing will only occur if you have connected the optional
Chapter 8).
, you can select
AX ONLY MODE
or
MANUAL MODE
, this
Summary of Settings
Sub-Settings
ON
OFF
FAX ONLY MOD
N T SWITCH*
FAX/T L AUTO SW
OFF
ON
2 TIM S
(1 99)
to
OFF
ON
15 S C
(1 99)
to
ON
OFF
25
(00 99)
to
ON
OFF
OFF
ON
14-7