Report Settings; Fax Send Result Report Settings (Fax Tx Report) - Canon IR3250 Reference Manual

Report Settings

You can specify whether to print a Fax TX Report after every send job, only when an error occurs
during transmission, or not at all. You can also specify whether a Communication Control Report
(the history of Send/Receive jobs) is printed after every 100 documents sent or received, or printed
at specified times. For a description of reports other than fax reports generated from Additional
Functions, see "Report Settings," in the Reference Guide.

Fax Send Result Report Settings (Fax TX Report)

You can print a Fax Send Result Report after the completion of every send job. You can also select
to print a portion of the sent document on the Fax Send Result Report (Error Copy Print). The fac-
tory setting is to print reports only when a sending error has occurred, but you can also select not to
print Send Result Reports at all.
NOTE
• The factory settings are:
- Fax TX Report:
- Error Copy Print (B&W Only): On
1
Call up the desired screen as follows:
Additional
key → [Report Settings] → [Settings] → [Fax TX Report]
Functions
2
Select [For Error Only] or [Off].
If [For Error Only] is selected
Go to step 3.
If [Off] is selected
Press the [OK] key and go to step 4.
[For Error Only] Prints report after send
[Off]
4-4

Report Settings

For Error Only.
error only.
Prints no reports.