Summary of Contents for Honeywell Ex-Or Digital Gold Series
Page 1
Digital Gold Series Microwave Detector for use with Analogue 1-10V ballasts MLS2421A MLS2421AF MLS2421ASM Installation and Commissioning Instructions Note: HP2000 required for commissioning...
Page 2
the volt-free output. If the output prior to pressing the switch is above 90% the Digital Gold Series Microwave Detector for use with Analogue output will ramp down; if below 90% it will ramp up. If the latest press and the 1-10V Ballasts current press are within 5 seconds of each other it will ramp in the opposite Only suitably qualified personnel should install this equipment.
Page 3
If it is desired to operate the lighting without any automatic photocell based 2) Regulating Control overlaid by PCELL RLY Switching Control control over the dimming process, (e.g. only manual control of dimming, by First carry out the commissioning procedure described for Regulating Only OneSwitch, and/or scene setting by HC5 Infrared Hand-held Controller is control (under Photocell Commissioning).
Page 4
Haydock Lane, Haydock, the packaging and product Merseyside WA11 9UJ should be disposed of via a suitable recycling centre. Tel: +44 (0)1942 719229 Do not dispose of with normal Fax: +44 (0)1942 508753 household waste. Do not burn. Email: technicalsales.ex-or@honeywell.com www.ex-or.com W4474D...