Digital gold pir detector with regulating photocell (8 pages)
Summary of Contents for Honeywell Ex-Or MLS
Page 1
MLS Digital Hi-Bay Detector MLS2001DHBF & MLS2001DHBSM for DSI ballasts MLS2001DALIHBF & MLS2001DALIHBSM for DALI ballasts MLS2001DHBF MLS2001DALIHBF MLS2001DHBSM MLS2001DALIHBSM Installation and Commissioning Instructions Note: HP2000 required for commissioning...
Page 2
MLS Digital Hi-Bay Detector: MLS2001DHBF/SM for DSI & MLS2001DALIHBF/SM for DALI ballasts Only suitably qualified personnel should install this equipment. Fixing Flush Version: Depth required behind ceiling: 62mm from front flange plus an allowance for the minimum bend radius of the cable.
Page 3
Commissioning The factory default settings shown in the table below will be appropriate for most applications. However, the installer does have the facility to re-programme all parameters using the HP2000 Programmer. These parameters may be re-programmed any number of times and all settings will be retained in the event of a power loss. Parameter Options Pre-Set...
Page 4
Haydock Lane, Haydock, Merseyside WA11 9UJ the packaging and product should be disposed of via a suitable recycling centre. Tel: +44 (0)1942 719229 Do not dispose of with normal Fax: +44 (0)1942 508753 household waste. Do not burn. Email: technicalsales.ex-or@honeywell.com www.ex-or.com W4451F...