Makita UH013G Instruction Manual page 13

12. Remove the screw inserted into the hole on the
shear blades in step 9, and then slide the blade cover.
1
Fig.20
► 1 . Screw
13. Attach a new sleeve.
Fig.21
► 1 . Sleeve
14. Tighten the screw together with the sleeve to fix
the shear blades.
1
Fig.22
► 1 . Screw
15. Firmly tighten the screws which were temporarily
fixed in step 11.
1
16. Attach the bearing and the rod.
1
2
3
Fig.23
► 1 . Rod 2. Small hole 3. Bearing
NOTICE:
Apply a small amount of grease to the
inner periphery of the small hole of the rod.
NOTICE:
Make sure that the protrusion on the
shear blades fits in the small hole on the rod.
17. Attach the plate.
Fig.24
► 1 . Protrusion 2. Plate
NOTICE:
Make sure that the protrusion on the
shear blades fits in the hole on the plate.
18. Attach the cover, and then tighten six bolts.
1
Fig.25
► 1 . Bolt 2. Cover
13 ENGLISH
1
2
2