Wiring Terminals; Powering Up The Wall Module - Honeywell TR80UWD Installation And Operating Manual

1.3.3.1 Wiring Terminals

Terminals Number
1
2
5
6
7
8
9
10
11
12
13

1.3.4 Powering Up the Wall Module

Once the wall module is installed and powered, the unit gets started shows firm-
ware version number and goes through the startup sequence to display the ready
or protected mode.
TR80 - Installation and Operation Guide
Legends Description
L 100 to 230 V AC, 50/60 Hz
Power supply connection
N
~
24 Vac/dc ± 10%
+
Power supply connection
GND
+ RS485 Port 1
Modbus RTU slave connection to controller
-
COM Shared common for port1 & port 2
+ RS485 Port 2
Modbus RTU repeater connection to DALI64
-
UI General purpose universal input for
NTC10K, NTC20K, 0-10 Vdc & voltage free contact
GND
7