Table of Contents
Advertisement
Available languages
Available languages
The D8R4 card is supplied with standoffs and the cable for connection between
regulation and expansion card .
1.
Switch the drive off.
2.
Fasten the D8R4 card to the drive regulation board by means of screws
(B) and standoffs (A).
3.
The D8R4 card is connected to the regulator card through the XH
connector using the supplied cable. The power supply (+5V) and the
control signals are provided by the drive via the XH connector.
4.
Switch on the drive.
—————— I/O Expansion card ——————
D8R4 expanded I/O
Chapter 2 - MOUNTING
13
Advertisement
Table of Contents
