Honeywell BW GasAlert MicroClip XT User Manual page 33

Alarms
L
L
If
be disabled during a low alarm condition. The vibrator and visual
alarm indicators remain active until the alarm condition changes
or the detector deactivates. Press
alarm and deactivate the audible alarm. If the alarm escalates to
a high, TWA, or STEL alarm, the audible alarm reactivates.
If enabled,
(audible, visual, and vibrator) to persist until the alarm is
acknowledged (by pressing
1.800.544.2843
Note
is enabled, the audible alarm can
to acknowledge the low
C
causes the low and high gas alarms
) and the gas concentration is
C
www.calcert.com
15
10 20
5 25
0 30
L
L
below the low alarm setpoint. The LCD displays the peak
concentration and the audible, visual, and vibrator indicators
persist until the alarm condition no longer exists. Enable/disable
in Fleet Manager II. Local regulations may
require be enabled.
GasAlertMicroClip
sales@calcert.com
Alarms