Honeywell BW GasAlert MicroClip XT User Manual page 17

Last Calibration Failed (optional)
When the CAL FAILURE displays, the previous calibration has
failed but the calibration is still valid until the next calibration due
date.
Overdue Calibration
1.800.544.2843
Note
www.calcert.com
15
10 20
5 25
0 30
If calibration is not performed, or
2 minutes, the detector automatically deactivates.
Cal IR Lock
Bump Test
A bump test cannot be conducted if the detector has just been
calibrated. If the Bump Interval option is defined as
Manager II, the bump test is bypassed.
BW recommends to "bump test" the sensors, before each day's
use, to confirm their ability to respond to gas by exposing the
detector to a gas concentration that exceeds the alarm setpoints.
GasAlertMicroClip
Activating the Detector
Note
is not pressed within
C
Note
in Fleet
sales@calcert.com
C