Honeywell BW GasAlert MicroClip XT User Manual page 25

Calibration Gas Concentration
1.800.544.2843
a
www.calcert.com
15
10 20
5 25
0 30
Calibration Interval
Bump Interval
BW recommends to bump test the sensors before each day's
use to confirm their ability to respond to gas by exposing the
detector to a gas concentration that exceeds the alarm setpoints.
Verify that the audible and visual alarms activate. Calibrate if the
readings are not within the specified limits.
GasAlertMicroClip
Sensor Configuration
a
Note
sales@calcert.com