Huawei B2268H User Manual page 54

LTE TDD B2268H
User Guide
Step 5 If the client device's configuration interface has an area for entering another device's PIN, you
can either enter the client's PIN in the AP, or enter the AP's PIN in the client - it does not matter
which.
Step 6 Start WPS on both devices within two minutes.
Step 7 Use the configuration utility to activate WPS, not the push-button on the device itself.
Step 8 On a computer connected to the wireless client, try to connect to the Internet. If you can connect,
WPS was successful.
----End
If you cannot connect, check the list of associated wireless clients in the AP's configuration
utility. If you see the wireless client in the list, WPS was successful.
The following figure shows a WPS-enabled wireless client (installed in a notebook computer)
connecting to the WPS-enabled AP via the PIN method.
Issue 01 (2014-01-15) Copyright © Huawei Technologies Co., Ltd.
5 Wireless
47