Wan Interface Edit - Huawei B2268H User Manual

LTE TDD B2268H
User Guide
LABEL
Cancel
Internet Setup
Enabled
Name
IPv4/IPv6
Mode
APN
NAT
Modify

4.2.1 WAN Interface Edit

Use this screen to configure a WAN connection.
In the Network Setting > Broadband screen, click the Interface Setup section's Edit icon
next to the connection you want to configure, the screen displays as shown next.
Issue 01 (2014-01-15)
DESCRIPTION
Click this to restore your previously saved settings in this section.
This shows the APN service is activated or inactivated.
This is the service name of the connection.
This shows whether the connection uses IPv6 or IPv4.
This is the name of the LTE network to which the LTE Device will connect.
This shows whether NAT is activated or not for this connection. NAT is not
available when the connection uses the bridging service.
Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the Device. A window
displays asking you to confirm that you want to delete the connection.
Copyright © Huawei Technologies Co., Ltd.
4 Broadband
23