Huawei B2268H User Manual page 109

LTE TDD B2268H
User Guide
LABEL
URL Type
URL Type
Voice Features
Primary
Compression
Type
Secondary
Compression
Type
Third
Compression
Type
Speaking
Volume
Control
Listening
Volume
Control
Active G.168
(Echo
Cancellation)
Active VAD
(Voice Active
Detector)
Call Features
Send Caller ID
Active Call
Transfer
Active Call
Waiting
Active Call
Waiting Reject
Time
Active
Issue 01 (2014-01-15)
DESCRIPTION
Select whether or not to include the SIP service domain name when the
LTE Device sends the SIP number.
SIP - include the SIP service domain name.
TEL - do not include the SIP service domain name.
Select the type of voice coder/decoder (codec) that you want the LTE
Device to use. G.711 provides higher voice quality but requires more
bandwidth (64 kbps).
•
G.711MuLaw is typically used in North America and Japan.
•
G.711ALaw is typically used in Europe.
•
G.729 only requires 8 kbps.
Select the LTE Device's first choice for voice coder/decoder.
Select the LTE Device's second choice for voice coder/decoder. Select
None if you only want the LTE Device to accept the first choice.
Select the LTE Device's third choice for voice coder/decoder. Select None
if you only want the LTE Device to accept the first or second choice.
Enter the loudness that the LTE Device uses for speech that it sends to the
peer device.
Minimum is the quietest, and Maximum is the loudest.
Enter the loudness that the LTE Device uses for speech that it receives
from the peer device. Minimum is the quietest, and Maximum is the
loudest.
Select this if you want to eliminate the echo caused by the sound of your
voice reverberating in the telephone receiver while you talk.
Select this if the LTE Device should stop transmitting when you are not
speaking. This reduces the bandwidth the LTE Device uses.
Select this if you want to send identification when you make VoIP phone
calls. Clear this if you do not want to send identification.
Select this to enable call transfer on the LTE Device. This allows you to
transfer an incoming call (that you have answered) to another phone.
Select this to enable call waiting on the LTE Device. This allows you to
place a call on hold while you answer another incoming call on the same
telephone (directory) number.
Specify a time of seconds that the LTE Device waits before rejecting the
second call if you do not answer it.
Select this if you want the LTE Device to forward all incoming calls to the
Copyright © Huawei Technologies Co., Ltd.
13 VoIP
102