Ipv6; The Wlan Button - Huawei B2268H User Manual

LTE TDD B2268H
User Guide
Figure 1-3 Wireless Connection Application

1.2.4 IPv6

IPv6 is not support

1.3 The WLAN Button

You can use the WIRELESS On/Off button on top of the device to turn the wireless LAN on or
off. You can also use it to activate WPS in order to quickly set up a wireless network with strong
security.
Turn the Wireless LAN On or Off
Step 1 Make sure the PWR/SYS LED is on (not blinking).
Step 2 Press the WIRELESS On/Off button for one second and release it. The WLAN/WPS LED
should change from on to off or vice versa.
----End
Activate WPS
Step 1 Make sure the PWR/SYS LED is on (not blinking).
Step 2 Press the WIRELESS On/Off button for more than five seconds and release it. Press the WPS
button on another WPS-enabled device within range of the LTE Device. The WLAN/ WPS
LED should flash while the LTE Device sets up a WPS connection with the wireless device.
----End
Issue 01 (2014-01-15)
You must activate WPS in the LTE Device and in another wireless device within two minutes of each
other. See Section 5.7.6 for more information.
Copyright © Huawei Technologies Co., Ltd.
1 Introduction
3