Table of Contents
Advertisement
WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)
After entering the configuration menu, you are forwarded to the Web Browser
configuration. To change the web Browser configuration, press the EDIT button on
the right top on the page.
Change the "on start" behavior of the device.
Table 2. Web browser settings
Item
Default
Open settings page
On Startup
Continue where you left Jump to the application where you left
Open homepage
Homepage
https://google.com
By default, all network interfaces are configured for DHCP. The ETH0 (which is
located right next to the power connector - refer to the WEB-HMI User's manual) is
configured as WAN port and should be used to provide the connection to the
required web server.
If you connect the panel to the network using ETH0 and a DHCP server is running,
the Ip-Address is automatically requested from the DHCP server.
If no DHCP server is available or can't be used on site, the configuration can be
changed to static IP configuration. To configure the network interface, open the
"Network" tab and press the EDIT button on the top right.
7
The Web Browser Settings
Description
After a restart of the device, the setting
page is displayed
Open the configured Homepage
Enter here the start page which you want
to load as homepage including http:// or
https://
Configure the Network interface
EN2Z-1077GE51 R0621
Advertisement
Table of Contents
