Table of Contents
Advertisement
WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)
EN2Z-1077GE51 R0621
It is possible to update system components of the HMI device. This is done from the
management area.
NOTE: Working in the Management area is a critical operation and, if not performed
correctly, may cause product damages requiring service of the product.
Contact technical support for assistance.
Use the "Clear" command inside the "Data" section to remove HMI Runtime
from the device (Factory Restore).
This option enables user to set various characteristics of the display to be changed:
Parameter
Description
Brightness
Adjust the backlight level between '0' (minimum) and '10'
(maximum) by touching a position along the Brightness bar or
by using the + or - buttons.
Back light timeout Adjust the backlight timeout period between 'always on' and
'60 minutes' (in 1 minute intervals) by touching a position along
the Backlight timeout bar or by using the + or - buttons.
If required, select a different Orientation from the displayed
Orientation
options.
Note: Changing the orientation will ask you to confirm the new
setting and will require the HMI panel to reboot before the new
orientation to take effect.
Lists the fonts installed on the HMI panel and allows other fonts to be installed.
Standard Fonts:
This area lists all fonts that are included as standard - these cannot be removed.
Custom Fonts
Shows any user-installed fonts. You can install/remove new fonts from here.
1.
Select
(+ sign) to add a new font. The following dialogue box is
displayed:
2.
Select Browse. The following screen is displayed:
3.
Insert a USB memory stick (containing the required font(s)) into one of the
USB ports on the lower edge of the HMI panel and wait for the device
name (e.g. usbmemory) to appear on the screen.
4.
Double-tap the USB device name.
12
Management
Display
Fonts
Install additional fonts
Advertisement
Table of Contents
